- C wipers are ideal for cleaning large steel plates with inaccuracies on the surface - the highly flexible wiper lip easily compensates for the uneven surface.
- A pre-load up to 4 mm (while maintaining constant low friction) makes this wiper especially suitable for the internal space of high-speed drilling.
- An optional high-grade steel spring can be vulcanized to the rubber for excellent protection against hot chips.
MW C |
Type |
Part # |
PROTECTION |
H |
S |
W |
T |
D |
Length |
Material |
---|---|---|---|---|---|---|---|---|---|---|
without spring steel
with spring steel |
MW C 1 | TW-1000197 | Spring Steel | 25 | 15.5 | 3 | 12 | 29 | 800 | NBR |
MW C 1L | TW-1076201 | Spring Steel | 25 | 15 | 3 | 12 | 29 | 1000 | NBR | |
MW C 2 | TW-1000198 | Spring Steel | 25 | 15.5 | 3 | 12 | 29 | 800 | FPM | |
MW C 2L | TW-1106282 | Spring Steel | 25 | 15 | 3 | 12 | 29 | 1000 | FPM | |
MW C 3 | TW-1000199 | - | 25 | 15.5 | 3 | 12 | - | 800 | NBR | |
MW C 4 | TW-1000200 | - | 25 | 15.5 | 3 | 12 | - | 800 | FPM | |
MW C 5 | TW-1000113 | Spring Steel | 30 | 20.5 | 3 | 12 | 34 | 800 | NBR | |
MW C 5L | TW-1017951 | Spring Steel | 30 | 20.5 | 3 | 12 | 34 | 1000 | NBR | |
MW C 6 | TW-1000201 | Spring Steel | 30 | 20.5 | 3 | 12 | 34 | 800 | FPM | |
MW C 6L | TW-1025030 | Spring Steel | 30 | 20.5 | 3 | 12 | 34 | 1000 | FPM | |
MW C 7 | TW-1000087 | - | 30 | 20.5 | 3 | 12 | - | 800 | NBR | |
MW C 7L | TW-1025031 | - | 30 | 20.5 | 3 | 12 | - | 1000 | NBR | |
MW C 8 | TW-1000202 | - | 30 | 20.5 | 3 | 12 | - | 800 | FPM | |
MW C 8L | TW-1024048 | - | 30 | 20.5 | 3 | 12 | - | 1000 | FPM | |
MW C 9 | TW-1018620 | Spring Steel | 35 | 25.5 | 3 | 12 | 39 | 800 | NBR | |
MW C 10 | TW-1025032 | Spring Steel | 35 | 25.5 | 3 | 12 | 39 | 800 | FPM | |
MW C 11 | TW-1025033 | - | 35 | 25.5 | 3 | 12 | - | 800 | NBR | |
MW C 12 | TW-1025034 | - | 35 | 25.5 | 3 | 12 | - | 800 | FPM | |
MW C 13 | TW-1099745 | - | 30 | 20 | 3 | 12 | - | 1200 | NBR | |
MW C 14 | TW-1106283 | - | 30 | 20 | 3 | 12 | - | 1200 | FPM |